Power cycling is the act of turning a piece of equipment, usually a computer, off and then on again. Reasons for power cycling include having an electronic device reinitialize its set of configuration parameters or recover from an unresponsive state of its mission critical functionality, such as in a crash or hang situation. Power cycling can also be used to reset network activity inside a modem. It can also be among the first steps for troubleshooting an issue. == Overview == Power cycling can be done manually, usually using the power switch on the device, or remotely, through some type of external device connected to the power input. In the data center environment, remote control power cycling can usually be done through a power distribution unit, over the network. In the home environment, this can be done through home automation powerline communications. Most Internet service providers publish a "how-to" on their website showing their customers the correct procedure to power cycle their devices. Power cycling is a common diagnostic procedure usually performed first when a computer system freezes. However, frequently power cycling a computer can cause thermal stress. Reset has an equal effect on the software but may be less problematic for the hardware as power is not interrupted. == Historical uses == On all Apollo missions to the moon, the landing radar was required to acquire the surface before a landing could be attempted. But on Apollo 14, the landing radar was unable to lock on. Mission control told the astronauts to cycle the power. They did, the radar locked on just in time, and the landing was completed. During the Rosetta mission to comet 67P/Churyumov–Gerasimenko, the Philae lander did not return the expected telemetry on awakening after arrival at the comet. The problem was diagnosed as "somehow a glitch in the electronics", engineers cycled the power, and the lander awoke correctly. During the launch of the billion dollar AEHF-6 satellite on 26 March 2020 by an Atlas V rocket from Cape Canaveral Space Force Station in Florida, a hold was called at T-46 seconds due to hydraulic system not responding as expected. The launch crew turned it off and back on, and the launch proceeded normally. In 2023 the Interstellar Boundary Explorer spacecraft stopped responding to commands after an anomaly. When gentler techniques failed, NASA resorted to rebooting the spacecraft with the remote equivalent of a power cycle.
Objective vision
Objective Vision (Object Oriented Visionary) is a project mainly aimed at real-time computer vision and simulation vision of living creatures. it has three sections containing an open-source library of programming functions for using inside the projects, Virtual laboratory for scholars to check the application of functions directly and by command-line code for external and instant access, and the research section consists of paperwork and libraries to expand the scientific prove of works. == Background == The process has been used in the OVC libraries is as same as what's happening when living see a picture, and it's designed to give the researchers to experience the brain's visual cortex most close simulation for picture perception. The OVC was designed to work as a simulated visual cortex that has a critical job in processing and classify the objects to make it easier to work with pictures and graphical perception and processing. The human brain is much more aware of how it solves complex problems such as playing chess or solving algebra equations, which is why computer programmers have had so much success building machines that emulate this type of activity. but when the whole process is still a riddle that how the entities visionary system works. The project was simulated the visionary system by how it starts to convert the signals to image(actually the edges and colors) and then recognizing the shapes to find a relation between brain's information and image. The Objective Visionary system actually is concentrating on the separable sections, this separation gives the application visionary system the excellence processing result, because with this method the system do not waste much time on processing non significant sections and signals. this operation in the Objective Vision project called objective processing and because the O.V. mission is focused on human visionary simulation, so the developer refers with Objective Vision. == History == Objective-Vision is a Human (Natural) Visionary simulation Project developed by Michael Bidollahkhany. Following an explosion of interest during the 21st century were characterized by the maturing of the field and the significant growth of active applications; simulation of visionary systems, visionary based autonomous vehicle guidance, medical imaging (2D and 3D) and automatic surveillance are the most rapidly developing areas. This progress can be seen in an increasing number of software and hardware products on the market, as well as in a number of digital image processing software and APIs and also machine vision courses offered at universities worldwide. Therefore, the OVC project has been released as a research software project in 2016. One of important parts of this project was O.V.C. (Objective Vision Class library), that was designed to able companies and scientists to use the brain's most likely functionalities as visionary libraries to simplify and accelerate the image processing algorithms developments. The project started under MIT copyright license, but since 2018 the project continued as classified based on sponsors opinion. == The Algorithm == As developers claimed the algorithm used in the class library and developer's kit of project has been developed based on natural visionary system, and the functionalities containing image processing, optimization and labeling etc. are mostly upgraded and near techniques. Suppose that we've a picture of a jungle, or somewhere else, with this library developer will be able to manipulate not only the pixel of images for data extraction, but automatically based on which algorithm is used and image quality, he can manipulate directly a list of objects, same pixels and every data project needs to have, said the developer in his lecture answering how the algorithm works. === Viewpoint === For long times digital image processing and storing, was actually by processing just pixels; this Project tries to present a new kind of image processing and even storing, "objective vision" or "object-oriented visionary" is called. This project officially launched in May 2016, with the aim of making more adaptation between Computer Vision (Include Visionary, Digital image processing, discernment and even Perception) and Human Visual System; about development of the project: "...so we decided to research on Human Vision System, besides we worked on Artificial Retinal image processing and new visionary optimization unit(Presented at Istanbul Technical University Conference(Turkey 2015-2016)) and grew our research to Visionary CORTEX of Brain", Michael Bidollahkhany said. == Applications == The OVC application areas include: 2D and 3D feature toolkits Egomotion estimation Human–computer interaction (HCI) Mobile robotics Motion understanding Object identification Segmentation and recognition Stereopsis stereo vision: depth perception from two cameras Structure from motion (SFM) Motion tracking == Programming language == In first initial release of Objective Visionary Project the algorithm has been written in C++ and C#, and the virtual laboratory has been developed in C# and Delphi. Based on developers last lecture since the second release the complete algorithm has been re-written in C# based on .Net Core 1.0 to make it easier to work on different operating systems.
Snapshot isolation
In databases, and transaction processing (transaction management), snapshot isolation is a guarantee that all reads made in a transaction will see a consistent snapshot of the database (in practice it reads the last committed values that existed at the time it started), and the transaction itself will successfully commit only if no updates it has made conflict with any concurrent updates made since that snapshot. Snapshot isolation has been adopted by several major database management systems, such as InterBase, Firebird, Oracle, MySQL, PostgreSQL, SQL Anywhere, MongoDB and Microsoft SQL Server (2005 and later). The main reason for its adoption is that it allows better performance than serializability, yet still avoids most of the concurrency anomalies that serializability avoids (but not all). In practice snapshot isolation is implemented within multiversion concurrency control (MVCC), where generational values of each data item (versions) are maintained: MVCC is a common way to increase concurrency and performance by generating a new version of a database object each time the object is written, and allowing transactions' read operations of several last relevant versions (of each object). Snapshot isolation has been used to criticize the ANSI SQL-92 standard's definition of isolation levels, as it exhibits none of the "anomalies" that the SQL standard prohibited, yet is not serializable (the anomaly-free isolation level defined by ANSI). In spite of its distinction from serializability, snapshot isolation is sometimes referred to as serializable by Oracle. == Definition == A transaction executing under snapshot isolation appears to operate on a personal snapshot of the database, taken at the start of the transaction. When the transaction concludes, it will successfully commit only if the values updated by the transaction have not been changed externally since the snapshot was taken. Such a write–write conflict will cause the transaction to abort. In a write skew anomaly, two transactions (T1 and T2) concurrently read an overlapping data set (e.g. values V1 and V2), concurrently make disjoint updates (e.g. T1 updates V1, T2 updates V2), and finally concurrently commit, neither having seen the update performed by the other. Were the system serializable, such an anomaly would be impossible, as either T1 or T2 would have to occur "first", and be visible to the other. In contrast, snapshot isolation permits write skew anomalies. As a concrete example, imagine V1 and V2 are two balances held by a single person, Phil. The bank will allow either V1 or V2 to run a deficit, provided the total held in both is never negative (i.e. V1 + V2 ≥ 0). Both balances are currently $100. Phil initiates two transactions concurrently, T1 withdrawing $200 from V1, and T2 withdrawing $200 from V2. If the database guaranteed serializable transactions, the simplest way of coding T1 is to deduct $200 from V1, and then verify that V1 + V2 ≥ 0 still holds, aborting if not. T2 similarly deducts $200 from V2 and then verifies V1 + V2 ≥ 0. Since the transactions must serialize, either T1 happens first, leaving V1 = −$100, V2 = $100, and preventing T2 from succeeding (since V1 + (V2 − $200) is now −$200), or T2 happens first and similarly prevents T1 from committing. If the database is under snapshot isolation(MVCC), however, T1 and T2 operate on private snapshots of the database: each deducts $200 from an account, and then verifies that the new total is zero, using the other account value that held when the snapshot was taken. Since neither update conflicts, both commit successfully, leaving V1 = V2 = −$100, and V1 + V2 = −$200. Some systems built using multiversion concurrency control (MVCC) may support (only) snapshot isolation to allow transactions to proceed without worrying about concurrent operations, and more importantly without needing to re-verify all read operations when the transaction finally commits. This is convenient because MVCC maintains a series of recent history consistent states. The only information that must be stored during the transaction is a list of updates made, which can be scanned for conflicts fairly easily before being committed. However, MVCC systems (such as MarkLogic) will use locks to serialize writes together with MVCC to obtain some of the performance gains and still support the stronger "serializability" level of isolation. == Workarounds == Potential inconsistency problems arising from write skew anomalies can be fixed by adding (otherwise unnecessary) updates to the transactions in order to enforce the serializability property. Materialize the conflict Add a special conflict table, which both transactions update in order to create a direct write–write conflict. Promotion Have one transaction "update" a read-only location (replacing a value with the same value) in order to create a direct write–write conflict (or use an equivalent promotion, e.g. Oracle's SELECT FOR UPDATE). In the example above, we can materialize the conflict by adding a new table which makes the hidden constraint explicit, mapping each person to their total balance. Phil would start off with a total balance of $200, and each transaction would attempt to subtract $200 from this, creating a write–write conflict that would prevent the two from succeeding concurrently. However, this approach violates the normal form. Alternatively, we can promote one of the transaction's reads to a write. For instance, T2 could set V1 = V1, creating an artificial write–write conflict with T1 and, again, preventing the two from succeeding concurrently. This solution may not always be possible. In general, therefore, snapshot isolation puts some of the problem of maintaining non-trivial constraints onto the user, who may not appreciate either the potential pitfalls or the possible solutions. The upside to this transfer is better performance. == Terminology == Snapshot isolation is called "serializable" mode in Oracle and PostgreSQL versions prior to 9.1, which may cause confusion with the "real serializability" mode. There are arguments both for and against this decision; what is clear is that users must be aware of the distinction to avoid possible undesired anomalous behavior in their database system logic. == History == Snapshot isolation arose from work on multiversion concurrency control databases, where multiple versions of the database are maintained concurrently to allow readers to execute without colliding with writers. Such a system allows a natural definition and implementation of such an isolation level. InterBase, later owned by Borland, was acknowledged to provide SI rather than full serializability in version 4, and likely permitted write-skew anomalies since its first release in 1985. Unfortunately, the ANSI SQL-92 standard was written with a lock-based database in mind, and hence is rather vague when applied to MVCC systems. Berenson et al. wrote a paper in 1995 critiquing the SQL standard, and cited snapshot isolation as an example of an isolation level that did not exhibit the standard anomalies described in the ANSI SQL-92 standard, yet still had anomalous behaviour when compared with serializable transactions. In 2008, Cahill et al. showed that write-skew anomalies could be prevented by detecting and aborting "dangerous" triplets of concurrent transactions. This implementation of serializability is well-suited to multiversion concurrency control databases, and has been adopted in PostgreSQL 9.1, where it is known as Serializable Snapshot Isolation (SSI). When used consistently, this eliminates the need for the above workarounds. The downside over snapshot isolation is an increase in aborted transactions. This can perform better or worse than snapshot isolation with the above workarounds, depending on workload.
Dark mode
A dark mode, dark theme, night mode, or light-on-dark color scheme is a color scheme that uses light-colored text, icons, and graphical user interface elements on a dark background. It is often discussed in terms of computer user interface design and web design. Many modern websites and operating systems offer the user an optional light-on-dark display mode. Some users find dark mode displays more visually appealing, and claim that it can reduce eye strain. Displaying white at full brightness uses roughly six times as much power as pure black on a 2016 Google Pixel, which has an OLED display. However, conventional LED displays may not benefit from reduced power consumption; but if a LED display has the partial dimming features, it still benefits from reduced power consumption. Most modern operating systems support an optional light-on-dark color scheme. == History == Microsoft introduced the high contrast themes in Windows 95. Later, Microsoft introduced a dark theme in the Anniversary Update of Windows 10 in 2016. In 2018, Apple followed in macOS Mojave. In September 2019, iOS 13 and Android 10 both introduced dark modes. Some operating systems provide tools to change the dark mode state automatically at sundown or sunrise. A "prefers-color-scheme" option was created for front-end web developers in 2019, being a CSS property that signals a user's choice for their system to use a light or dark color theme. Firefox and Chromium have optional dark theme for all internal screens. It is also possible for third-party developers to implement their own dark themes. There are also a variety of browser add-ons that can re-theme web sites with dark color schemes, also aligning with system theme. Wikipedia's mobile and desktop versions received a dark mode option in 2024. == Implementation == There is a prefers-color-scheme media query in CSS, to detect if the user has requested light or dark color scheme and serve the requested color scheme. It can be indicated from the user's operating system preference or a user agent. CSS example: JavaScript example: == Energy usage == Light on dark color schemes require less energy to display on OLED displays. This positively impacts battery life and reduces energy consumption. While an OLED will consume around 40% of the power of an LCD displaying an image that is primarily black, it can use more than three times as much power to display an image with a white background, such as a document or web site. This can lead to reduced battery life and higher energy usage unless a light-on-dark color scheme is used. The long-term reduced power usage may also prolong battery life or the useful life of the display and battery. The energy savings that can be achieved using a light-on-dark color scheme are because of how OLED screens work: in an OLED screen, each subpixel generates its own light and it only consumes power when generating light. This is in contrast to how an LCD works: in an LCD, subpixels either block or allow light from an always-on (lit) LED backlight to pass through. "AMOLED Black" color schemes (that use pure black instead of dark gray) do not necessarily save more energy than other light-on-dark color schemes that use dark gray instead of black, as the power consumption on an AMOLED screen decreases proportionately to the average brightness of the displayed pixels. Although it is true that AMOLED black does save more energy than dark gray, the additional energy savings are often negligible; AMOLED black will only give an additional energy saving of less than 1%, for instance, over the dark gray that's used in the dark theme for Google's official Android apps. In November 2018, Google confirmed that dark mode on Android saved battery life. == Web issues == Some argue that a color scheme with light text on a dark background is easier to read on the screen, because the lower overall brightness causes less eyestrain, while others argue to the contrary. Some pages on the web are designed for white backgrounds; Image assets (GIF, PNG, SVG, WOFF, etc) can be used improperly causing visual artifacts if dark mode is forced (instead of designed for) with a plugin like Dark Reader.
Medical data breach
Medical data, including patients' identity information, health status, disease diagnosis and treatment, and biogenetic information, not only involve patients' privacy but also have a special sensitivity and important value, which may bring physical and mental distress and property loss to patients and even negatively affect social stability and national security once leaked. However, the development and application of medical AI must rely on a large amount of medical data for algorithm training, and the larger and more diverse the amount of data, the more accurate the results of its analysis and prediction will be. However, the application of big data technologies such as data collection, analysis and processing, cloud storage, and information sharing has increased the risk of data leakage. In the United States, the rate of such breaches has increased over time, with 176 million records breached by the end of 2017. By 2024, the U.S. Department of Health and Human Services reported 725 large healthcare data breaches affecting approximately 275 million individual records in a single year, marking a significant escalation in both the frequency and scale of incidents. == Black market for health data == In February 2015 an NPR report claimed that organized crime networks had ways of selling health data in the black market. In 2015 a Beazley employee estimated that medical records could sell on the black market for US$40-50. == How data is lost == Theft, data loss, hacking, and unauthorized account access are ways in which medical data breaches happen. Among reported breaches of medical information in the United States networked information systems accounted for the largest number of records breached. There are many data breaches happening in the US health care system, among business associates of the health care providers that continuously gain access to patients' data. == List of data breaches == In February 2024, a ransomware attack on Change Healthcare, a subsidiary of UnitedHealth Group, compromised the protected health information of approximately 100 million individuals, making it the largest healthcare data breach in United States history. The attack disrupted claims processing for healthcare providers nationwide for several weeks. In May 2024, MediSecure suffered a cyberattack involving ransomware in Australia. In May 2021, the Health Service Executive in the Republic of Ireland was the victim of a cyberattack involving ransomware, in the Health Service Executive cyberattack, with admission records and test results present in a sample of the data reviewed by the Financial Times. In October 2018, the Centers for Medicare and Medicaid Services in the US reported that around 75,000 individual records had been affected by a data breach that took place through the ACA Agent and Broker Portal. In 2018, Social Indicators Research published the scientific evidence of 173,398,820 (over 173 million) individuals affected in USA from October 2008 (when the data were collected) to September 2017 (when the statistical analysis took place). In 2015, Anthem Inc. lost data for 37 million people in the Anthem medical data breach In 2014 4.5 million people using Complete Health Systems had their data stolen In 2013-14 1 million people using Montana Department of Public Health and Human Services had their data stolen In 2013 4 million people using Advocate Health and Hospitals Corporation had their data stolen In 2011 4.9 million users of Tricare services had their data stolen due to an employee error by Science Applications International Corporation In 2011 1.9 million people using Health Net had their data stolen In 2011 1 million people using Nemours Foundation had their data stolen In 2010 6800 people using New York-Presbyterian Hospital and Columbia University Medical Center had their data breached. In response, those organizations agreed to pay the United States Department of Health and Human Services a US$4.8 million dollar fine. In 2009 1 million people using BlueCross BlueShield of Tennessee had their data stolen == Regulation == In the United States, the Health Insurance Portability and Accountability Act and Health Information Technology for Economic and Clinical Health Act require companies to report data breaches to affected individuals and the federal government. Under the HIPAA Breach Notification Rule, covered entities must notify affected individuals without unreasonable delay and no later than 60 days after discovering a breach of unsecured protected health information. Breaches affecting 500 or more individuals must also be reported to the HHS Secretary and to prominent media outlets serving the affected state or jurisdiction within the same timeframe; HHS publicly lists these larger breaches on its breach portal, commonly known as the "wall of shame." Breaches affecting fewer than 500 individuals are reported to HHS annually, no later than 60 days after the end of the calendar year in which they were discovered. Health Information Privacy Health Insurance Portability and Accountability Act of 1996 (HIPAA). - 45 CFR Parts 160 and 164, Standards for Privacy of Individually Identifiable Health Information and Security Standards for the Protection of Electronic Protected Health Information. HIPAA includes provisions designed to save health care businesses money by encouraging electronic transactions, as well as regulations to protect the security and confidentiality of patient information. The Privacy Rule became effective April 14, 2001, and most covered entities (health plans, health care clearinghouses, and health care providers that conduct certain financial and administrative transactions electronically) had until April 2003 to comply. This security provision became effective April 21, 2003. The Health Insurance Portability and Accountability Act (HIPAA) is the baseline set of federal regulations governing medical information. It does three things: i. i. i.Establish a structure for how personal health information is disclosed and establish the rights of individuals with respect to health information; ii.Specify security standards for the retention and transmission of electronic patient information; iii.Need a common format and data structure for the electronic exchange of health information. California-Specific Laws California’s medical privacy laws, primarily the Confidentiality of Medical Information Act (CMIA), the data breach sections of the Civil Code, and sections of the Health and Safety Code, provide HIPAA-like protections, although the terminology is different. HIPAA establishes a federal "minimum standard" that applies where there are gaps in California law, and HIPAA also specifies that stricter state laws will override or supersede HIPAA. California's health care privacy laws apply to providers who provide personal health records (PHR), while HIPAA only applies when the provider providing the PHR is a business associate of a covered entity. Federal law does not grant individuals the right to file a lawsuit in the event of a data breach (only the Attorney General can file a lawsuit), but California law does. This means that California law sets a higher standard for medical privacy, and that individuals in California enjoy stronger legal protections and more ways to hold entities that violate their medical privacy accountable. In the UK, the legal framework for how patient data is cared for and processed is the Data Protection Act 2018 (DPA), which incorporates the EU General Data Protection Regulation (GDPR) into law, and the common law duty of confidentiality (CLDC). The data protection legislation requires that the collection and processing of personal data be fair, lawful and transparent. This means that the collection and processing of data as defined by data protection legislation must always have a valid lawful basis and must also meet the requirements of the CLDC. In the China, Article 18 of the "National Health Care Big Data Standards, Security and Services Management Measures (for Trial Implementation)" (National Health Planning and Development (2018) No. 23) promulgated by the National Health Care Commission in 2018 states, "The responsible unit shall adopt measures such as data classification, important data backup, and encryption authentication to guarantee the security of health care big data." However, the scope and definition of important data are not covered. Although the "Information Security Technology-Healthcare Data Security Guide" (the "Guide") issued by the National Standardization Committee also proposes that important data should be evaluated and approved in accordance with the regulations, there is likewise no definition of the connotation and definition of important data.
Articulatory speech recognition
Articulatory speech recognition means the recovery of speech (in forms of phonemes, syllables or words) from acoustic signals with the help of articulatory modeling or an extra input of articulatory movement data. Speech recognition (or automatic speech recognition, acoustic speech recognition) means the recovery of speech from acoustics (sound wave) only. Articulatory information is extremely helpful when the acoustic input is in low quality, perhaps because of noise or missing data. Measurable information from the articulatory system (e.g. tongue, jaw movements) can supplement acoustic signals to improve phone recognition accuracy by 2%. However, attempts to estimate articulatory data from acoustic signals alone have not significantly enhanced recognition performance.
Security and Privacy in Computer Systems
Security and Privacy in Computer Systems is a paper by Willis Ware that was first presented to the public at the 1967 Spring Joint Computer Conference. == Significance == Ware's presentation was the first public conference session about information security and privacy in respect of computer systems, especially networked or remotely-accessed ones. The IEEE Annals of the History of Computing said that Ware's 1967 Spring Joint Computer Conference session, together with 1970's Ware report, marked the start of the field of computer security.